Hardware setup - early 2021
===========================

Just saw  Logout's setup [1]  (in Czech) so I  decided to share  my own
setup, too.

Here it is:

- desktop: Raptor CS Blackbird (POWER9) + EIZO 24" LCD, SGI keyboard
  and mouse + HP LaserJet printer (shared) ; Fedora 32

- main laptop: GPD Pocket (7" or so LCD, Intel Atom); Ubuntu 20.04

- home SGI workstation: Indigo R3000 ; IRIX 5.3 (shares peripherals
  with Blackbird)

- cottage workstation: Indigo R4000 + Compaq 15" LCD, original beige
  SGI keyboard and mouse ; IRIX 5.3

- PDA: TRGpro (Palm IIIxe version, 8 MB of RAM, B/W LCD, 32 MB
  CompactFlash card) + Kodak PalmPix Camera ; Palm OS 3.51

- tablet: reMarkable 2 (10" e-paper screen)

- phone: PUNKT. MP-01

- second phone (used on weekends, for hiking and so): Palm Centro

- camera: Kodak FZ-101

- GPS device: Garmin eTrex 25

- alarm clock and bedside notepad: PSION Organiser II LZ

So during workdays  I carry a Punkt phone and  the TRGpro (actually the
TRGpro is on  my desk at work  for most of time) and  sometimes the GPD
Pocket. On  weekend I carry  the Centro, the  Garmin and the  camera. I
think this is almost the same like it was in few past years.

Of course I  have and sometimes use several other  devices. But I'm use
them  so infrequently  so  I don't  think that  they  should be  listed
among  my  "main"  devices:  Apple  PowerBook G4  1.67  (OS  10.5),  BQ
M10  (UbPorts  - Ubuntu  Touch),  Lenovo  x60 (9front),  MilkyMist  One
(visualizations/effects for  my CD player),  Amazon Kindle 2013  (but I
don't  remember why  I actually  turned  it on),  iMac G5,  Elektronika
MK-90, Cambridge Z88.

It might look that I mostly abandoned my SGI workflow. At the moment it
is probably  true. The HDD of  my SGI Indy  failed in 2019 and  I still
don't managed to  return the device to  life (I already have  a new HDD
but I also have  to install and set up many  thinks). My long-time main
workstation failed recently  (hopefully it is just bad  RAM) which have
leaved me without  a configured and working SGI (the  Indigos have only
the old  IRIX 5.3  which cannot  run many  of tools  I need  because of
compatibility or because of their specs - it includes recent version of
Gnuplot and Octave, compiler and some libraries, TeX and so on). I hope
I  will able  to manage  this. I  also have  a SGI  Indigo 2.  It still
refuses to boot but there are still some tricks which should try.


References:

[1] http://technomorous.eu/post/174201832483