========================= SFTP, hurried work, UPS ========================= Yet again a continuation of the last month's news. SFTP: libssh ============ After fixing a couple of leaks in the libssh2 bindings (one was merged into the upstream, another one still hangs as a pull request), and trying it on a newer system (Debian 11 instead of Debian 9, with libssh2 version 1.9.0 instead of 1.7.0), observed that it still leaks memory. Composed libssh bindings, noticed that it occasionally enters an endless loop somewhere in sftp_open, and loads a CPU core completely with libssh version 0.7.3. But then tried it on Debian 11, with libssh 0.9.8, and looks like it finally works without leaks or loops. Took me a while to find a working option, for such a seemingly common protocol. Going to publish the bindings on Hackage after a little more testing, and maybe some refinement, but for now they are at . Hurried work ============ Had quite a bit of hurried work lately: tasks keep coming, each one seemingly more urgent than the previous one, so switching and not even finishing many of those. Had to debug IPsec and configure some networking. Apparently strongSwan sometimes requires to add forwarding rules manually: maybe it happened because of the old configuration format on a newer system in that case, or because Netfilter had some rules set by (or for) Docker, and possibly VirtualBox. But it was needed to configure some forwarding and to debug IPsec in the first place because, as it turned out later, Roskomnadzor (the local censorship organization) started blocking IPsec packets between parts of our system. Then I had to work on data wrangling and a Web backend. The data wrangling involved acquiring data from an undocumented API, which seemed straightforward at first, with a sensible data model. But eventually I learned that the same structures have different semantics in different parts of it, some properties are dummy ones and must be ignored, and so on; not only the data model turned out to be quite different, but it also required more of data wrangling to get what is needed on the output, and initially it lacked the values required to connect a part of the data it provides to another part (which turned out to be a bug, and was then fixed). Apparently that API was hurried, too, so this is how it happened (though a textual description could still have been provided). While working on that, kept running into Roskomnadzor's network blocks as well: cdn.jsdelivr.net is blocked, so Hackage loaded slowly, even with Tor for jsdelivr.net. While swagger.io geo-blocks requests from Russian IP addresses. Those things are always annoying (and reminders of the isolation are rather upsetting), but particularly so when in a hurry. After that functionality was hurriedly added into the project, to test it in production, it turned out that there is some inspection on the next day, and things are broken. The project was not touched for a few years prior to that, and was left in a semi-rewritten state, so it was expected that things will break. So another day of hurried fixing followed. Still sorting out that one, occasionally receiving some minor day-to-day debugging requests, testing and adjusting SFTP as mentioned above, and being poked with other tasks (the ones that are on hold) as well. I guess this is how burnout can happen: it is hard to care much when there is a constant hurry like that, without a known sensible reason. Actually the oldest surviving post in this blog, "useless code", is about this Web-related project; it does not seem to improve much, though at least using PostgREST there now, which is nice. UPS === My old UPS (an APC one, Smart-UPS, 1500 VA, about 15 years old) started malfunctioning, cutting the power to the computer twice in a day, even while there was no mains power cut. I thought to replace it with a similar one, but they are quite expensive, and there are other issues: they are heavy, and as comments on the online stores' websites say, they make beeping sounds (as did mine), which is undesirable for a bedroom. So I picked the CyberPower CP1300EPFCLCD UPS instead: it is lighter (about 10 kg, together with batteries), still an overkill for my setup (which takes about 85 W, the UPS should keep it running on battery for about 40 minutes), cheaper (found a store listed at cyberpower.com, with fast and free delivery to a nearby place for me to pick it up, where it was 15% cheaper than in other stores, at about $280). Also checked beforehand that similar models work with NUT, being supported by the usbhid driver on Linux, and indeed it worked out of the box: the usbhid driver sees it, and the Xfce Power Manager is now configured to shutdown the system when the battery runs low. Looks like the battery changing procedure is a little tricky on these, but should be doable, and the replacement batteries are available around here. Maybe will try to plug something less important into the old UPS, and see how reproducible the issue is. If it happens regularly, maybe could take it somewhere to get fixed. I am not confident enough with electronics to poke at something like an UPS. Miscellany ========== - Tried store-bought syrniki, discovered that they can be nicer than the ones I tried previously (not as floury and dry, or dense and sour), though those store-bought ones were overly sweet. Since they are similar to small cheesecakes, decided to try a crustless cheesecake, akin to Basque cheesecake: crust is both tricky to make, and often overly sweet, seems to be the least healthy part of a cheesecake. Used 600 grams of ricotta, 200 grams of Greek yogurt, 3 eggs, 2 tablespoons of flour, 1 tablespoon of honey, vanilla powder; lined a springform pan with parchment paper, poured the mixture in, baked for an hour at 200 degrees Celsius, topped with halved strawberries. Turned out nice. - In other culinary news, tried shortcrust pastry with olive oil, as in . It does work, easy to make, the dough is easy to handle, and possibly it is healthier than with butter, though perhaps more expensive. Butter-based shortcrust seems to be more suitable for sweet pies, but this is nice for savory ones. - I keep trying a V60 dripper for coffee brewing, but still unsure how it compares to AeroPress. I guess the results may be more consistent in AeroPress, though maybe it is simply because I keep experimenting with the technique for brewing with a V60 dripper. - As a month ago, skipping physical exercises occasionally (mostly one of the stretching routines, and only took one rest day when I visited a dentist for a regular check, but otherwise doing all the exercises daily), and going through the physics textbook even more slowly than before, being rather busy with work and other chores (still at chapter 5, now working through the problems that follow it). Generally there is quite a lot of stuff to do, and unfortunately not always enough time even for all the scheduled activities, while unplanned chores keep popping up. ---- :Date: 2024-06-18