(DIR) Return Create A Forum - Home --------------------------------------------------------- Chainsaw Repair (HTM) https://chainsawrepair.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Partner ***************************************************** #Post#: 53759-------------------------------------------------- Re: What was your first Partner saw? By: 660magnum Date: February 6, 2015, 9:02 am --------------------------------------------------------- (HTM) http://www.ebay.com/itm/160441608650 #Post#: 53781-------------------------------------------------- Re: What was your first Partner saw? By: farmboy Date: February 6, 2015, 4:06 pm --------------------------------------------------------- 5000+ my first Partner then another 5000+ and a minty 400. Rounds out all my Partners. Both 5000's are real nice not mint but real nice. Cut talked me into the 5K when he was into them. Shep #Post#: 53783-------------------------------------------------- Re: What was your first Partner saw? By: 67L36Driver Date: February 6, 2015, 5:54 pm --------------------------------------------------------- [quote author=660magnum link=topic=116.msg53759#msg53759 date=1423234948] (HTM) http://www.ebay.com/itm/160441608650 [/quote] Now to find the pulley and spring to go with the cover. If it were my saw, I'd be searching but it's not. #Post#: 58494-------------------------------------------------- Re: What was your first Partner saw? By: leec Date: June 3, 2015, 9:51 pm --------------------------------------------------------- Recently picked a Skil saw which was supposed to be seized for $35.00. It turns out that a bolt had come loose behind the flywheel and stopped it from turning. P&C pristine good 20" bar and a reasonable chain. Has a chain brake and AV so turned out to be an F65 (65cc) not the 55 I thought it might be. Win Win, I'm a happy man! Carb needs seeing to then should be mustard! #Post#: 58495-------------------------------------------------- Re: What was your first Partner saw? By: leec Date: June 3, 2015, 9:57 pm --------------------------------------------------------- [quote author=leec link=topic=116.msg53729#msg53729 date=1423177708] I waiting on a Skil 1632 which I believe is an s55. Black and yellow. Won't have it for a few weeks but looking forward to getting it. [/quote] Well I pick it up and this is what I found. Sold as seized. I discovered that a bolt had come loose behind the flywheel and stopped the fw from turning. P&C lovely condition, 20" bar not a bad chain, chain brake and full AV. The AV and the three shoe clutch make this saw a 65cc saw not the 55 that I thought from Acres site. So for an investment of $35 I'm a happy man. Opps that a bit repetitive!! #Post#: 61894-------------------------------------------------- Re: What was your first Partner saw? By: The Ripper Date: September 22, 2015, 5:37 pm --------------------------------------------------------- Have a "60's" R16 that I'M fully impressed with in performance after some small mods and it's smooth operation. #Post#: 88678-------------------------------------------------- Re: What was your first Partner saw? By: partner Date: November 5, 2021, 5:43 pm --------------------------------------------------------- My first partner 465 saw is from 1990 and I got it 10 years later after swimming in the river :-D it worked until the end more than a decade after drying ;-) ***************************************************** (DIR) Previous Page (DIR) Next Page