(DIR) Return Create A Forum - Home --------------------------------------------------------- Chainsaw Repair (HTM) https://chainsawrepair.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Chainsaw Collection Pics - Signs - Whats on your be... ***************************************************** #Post#: 73354-------------------------------------------------- Re: Whats on your bench today By: Chainsawrepair Date: September 8, 2016, 2:34 pm --------------------------------------------------------- I cant make the 3450's go away from bench #2 on their own. :'( Just cant get into doing another one right now just to sell. :-X 3450's can be seen on #2 behind the 3.3 335 on cant. #Post#: 73357-------------------------------------------------- Re: Whats on your bench today By: Gatekeeper Date: September 8, 2016, 8:14 pm --------------------------------------------------------- [quote author=Cut4fun . link=topic=1732.msg73353#msg73353 date=1473362998] [quote author=mdavlee . link=topic=1732.msg73351#msg73351 date=1473362763] I've got these on the bench. Got to cut squish on them next. [img width=800 height=600] (HTM) http://uploads.tapatalk-cdn.com/20160908/08140ffd9c1aaf5403a3fa76efb9ae0d.jpg[/img] [/quote] Looks like a 2083 54mm saw on left in red. Yours? [/quote] My buddies. Starter needs some work. #Post#: 73366-------------------------------------------------- Re: Whats on your bench today By: Revpop Date: September 10, 2016, 10:26 am --------------------------------------------------------- [quote author=3000 FPS link=topic=1732.msg73319#msg73319 date=1473214233] Nice old saw there RevPop. The Countervibes make great saws and are easy to work on and maintain. They are some of my favorite Poulans. That is pretty cool that you even have the operators manual. One of the things that made me scratch my head and then had to verify in the owner's manual, which provided a very detailed illustration of components installation/orientation is how the bar and chain is oiled. Rather than through the bar adjusting hole and through to the bottom of the chain and into the bar groove from beneath this setup seems to simply dump or mist the chain at a point between the bar clamp plates, where the setup seems to drizzle oil onto top of the chain from the powerhead side only. I was wondering if anyone has had any issues with inadequate bar lubrication in this series of chainsaw? -Revpop #Post#: 73755-------------------------------------------------- Re: Whats on your bench today By: 3000 FPS Date: October 7, 2016, 9:40 pm --------------------------------------------------------- So this is a Stihl 090 all original and not in bad shape. It does not belong to me but I was asked to look at it and get it running. It has a 20" hard nose bar and .404 chain semichisel on it. I have it running pretty good now and I sharpened the chain but I think I will drop the rakers a little lower to make it cut faster. This thing is a beast and weighs a ton. It does not have any antivibe that I can see and vibrates your hands like crazy. According to Acres 137cc. #Post#: 73757-------------------------------------------------- Re: Whats on your bench today By: Chainsawrepair Date: October 7, 2016, 9:44 pm --------------------------------------------------------- Nice. I went over and did some cutting for Jim today. Saws in action board. Got a few to set on the bench when I unload. In the poulan board. #Post#: 73759-------------------------------------------------- Re: Whats on your bench today By: 3000 FPS Date: October 7, 2016, 9:53 pm --------------------------------------------------------- This saw I got for free for fixing the Stihl 090. This is a Jonsered 801 and is 80cc. I was told it had no spark when given to me. I found the kill switch was bad and shorting to ground all the time. It wreaked of bad fuel and the carburetor is going to have to be rebuilt on it. It has a tillotson. I did prime it through the carb and it fired so I think it will be a good runner. I need to get a different bar and chain for it. #Post#: 73760-------------------------------------------------- Re: Whats on your bench today By: Gatekeeper Date: October 7, 2016, 10:46 pm --------------------------------------------------------- That's a nice 801. Glad it was an easy fix. #Post#: 73768-------------------------------------------------- Re: Whats on your bench today By: 3000 FPS Date: October 8, 2016, 9:09 am --------------------------------------------------------- [quote author=mdavlee . link=topic=1732.msg73760#msg73760 date=1475898371] That's a nice 801. Glad it was an easy fix. [/quote] It should make a good saw. I noticed also the antivibe in some spots are pretty loose. I have not taken the antivibe apart yet to see what rubber parts are worn out. #Post#: 73777-------------------------------------------------- Re: Whats on your bench today By: Chainsawrepair Date: October 8, 2016, 3:46 pm --------------------------------------------------------- Roger please make sure to put your 090 801 projects in the brand boards so others can see your info and how to's etc. Stuff gets buried here in this board like other places. Thanks #Post#: 73786-------------------------------------------------- Re: Whats on your bench today By: chy_farm Date: October 9, 2016, 9:48 am --------------------------------------------------------- Love to see this type of Jons. Chy ***************************************************** (DIR) Previous Page (DIR) Next Page