(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Stihl
*****************************************************
#Post#: 48653--------------------------------------------------
Re: 084 Stihl for McBob
By: aclarke Date: October 31, 2014, 11:16 pm
---------------------------------------------------------
Under the Macs? Blasphemy! !! Hope you've been well Bob!
#Post#: 48660--------------------------------------------------
Re: 084 Stihl for McBob
By: pete Date: November 1, 2014, 2:03 am
---------------------------------------------------------
under my Mac's like that bit Bob. Bob have you suffered a
large hit on the head or something or is there a lady on the
scene that prefers the orange and white because apart from your
10 cube there has been very little macaction coming from you
lately
#Post#: 48661--------------------------------------------------
Re: 084 Stihl for McBob
By: Al Smith Date: November 1, 2014, 4:20 am
---------------------------------------------------------
The one I have spends most of its time on the shelf with the big
McCullochs which also don't see much action .On the other hand I
doubt any of them gets worn out in my life time .The reserve
fleet so to speak .
#Post#: 48901--------------------------------------------------
Re: 084 Stihl for McBob
By: mcbob Date: November 6, 2014, 6:47 pm
---------------------------------------------------------
Well I needed a new doorstopper as I wore the ass out of a 3120
here holding it open cant have the Mac's catching a chill now
can we
McBob
#Post#: 50482--------------------------------------------------
Re: Woods ported 084
By: Chainsawrepair Date: December 10, 2014, 5:34 pm
---------------------------------------------------------
Al Smith running my woods ported 084 at about 1min 24seconds in.
My race muffler 3120 at about 1min 32seconds in.
(HTM) http://youtu.be/D7pGfkR0JXk
#Post#: 50485--------------------------------------------------
Re: Woods ported 084
By: aclarke Date: December 10, 2014, 9:38 pm
---------------------------------------------------------
Cool vid. Al did a good job!
#Post#: 50690--------------------------------------------------
Re: Woods ported 084
By: Al Smith Date: December 15, 2014, 4:15 am
---------------------------------------------------------
It was fun but I think I tied for the most disquals that day. ;D
#Post#: 52400--------------------------------------------------
Re: Woods ported 084
By: Chainsawrepair Date: January 12, 2015, 4:47 pm
---------------------------------------------------------
[quote author=Al Smith link=topic=66.msg50690#msg50690
date=1418638554]
It was fun but I think I tied for the most disquals that day. ;D
[/quote]
You know if you hadnt cut out in the 5ci class with my woods
port. You would have beat me with my own 375 woods ported
against my alky 262 4ci saw running in the 5ci class.
#Post#: 52848--------------------------------------------------
084 seals
By: aclarke Date: January 19, 2015, 3:47 pm
---------------------------------------------------------
What's the scoop on 084 crank seals? I think we discussed
before using the ms880/780 seals? Any ideas on alternate p/n's
that will work?
#Post#: 52859--------------------------------------------------
Re: 084 seals
By: Chainsawrepair Date: January 19, 2015, 6:15 pm
---------------------------------------------------------
Man I remember but cant remember. Know what I mean.
Quick dig.
*****************************************************
(DIR) Previous Page
(DIR) Next Page