(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Stihl
*****************************************************
#Post#: 28166--------------------------------------------------
Re: stihl 084 barn find
By: stihls066 Date: November 24, 2013, 8:09 pm
---------------------------------------------------------
nice cut for fun. I got in the habit of doing all my dual ports
on opposite side of stock port on stihl. like I did on this 288
husqvarna
#Post#: 32920--------------------------------------------------
Splitting 084
By: bowleggedgoat Date: January 27, 2014, 9:04 pm
---------------------------------------------------------
I'm doing some work on my 084 and I need to open the crank case
to replace the bearings, I've never done it before can anyone
give me some advice on how to do it?
#Post#: 33317--------------------------------------------------
Re: Re: 084 crank
By: Chainsawrepair Date: February 2, 2014, 10:31 am
---------------------------------------------------------
I never had to split a 084. Anyone?
#Post#: 33322--------------------------------------------------
Re: Re: 084 crank
By: blsnelling Date: February 2, 2014, 11:55 am
---------------------------------------------------------
It's really no different than splitting any other saw, just
bigger.
#Post#: 33323--------------------------------------------------
Re: Re: 084 crank
By: Chainsawrepair Date: February 2, 2014, 12:03 pm
---------------------------------------------------------
I never have used any special tools.
Shows the husky tool on a 034.
(HTM) http://youtu.be/vejgxWUpVo4
#Post#: 33324--------------------------------------------------
Re: Re: 084 crank
By: Chainsawrepair Date: February 2, 2014, 12:05 pm
---------------------------------------------------------
Thread with how to's on splitting with homemade tool
(HTM) http://chainsawrepair.createaforum.com/ported-saws/how-to-video-thread/
#Post#: 33724--------------------------------------------------
084 Air Filter
By: bowleggedgoat Date: February 7, 2014, 10:17 pm
---------------------------------------------------------
Hi, I'm rebuilding an 084 AV and I am wondering about the air
filter. The one I have has the flocked air filter but it's shot.
I've noticed that most of the air filter kits sold for the 084
are with the other kind of round air filter that looks more like
a mini car air filter. Are they interchangeable or do I need to
find the flocked flat air filter?
Also, any tips for splitting the case? I need to replace the
main bearings.
#Post#: 33725--------------------------------------------------
Re: 084 Air Filter
By: 660magnum Date: February 7, 2014, 10:45 pm
---------------------------------------------------------
The filter base is different for the other kind of filter.
The flocked filter was fine for me as I was just a firewood guy
and might use the saw heavy for a couple days once/year.
The 084 was not bad about stuffing up the filter.
#Post#: 33745--------------------------------------------------
Re: 084 Air Filter
By: Gatekeeper Date: February 8, 2014, 8:41 am
---------------------------------------------------------
I bought a max flow kit for my 088. I figure that will e a
better setup for milling.
#Post#: 33874--------------------------------------------------
Re: 084 Air Filter
By: Chainsawrepair Date: February 9, 2014, 10:45 am
---------------------------------------------------------
[quote author=bowleggedgoat link=topic=3052.msg33724#msg33724
date=1391833025]
Also, any tips for splitting the case? I need to replace the
main bearings.
[/quote]
(HTM) http://chainsawrepair.createaforum.com/stihl/re-084-crank/msg32920/#msg32920
*****************************************************
(DIR) Previous Page
(DIR) Next Page