(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Chainsaw Collection Pics - Signs - Whats on your be...
*****************************************************
#Post#: 45439--------------------------------------------------
Re: Whats on your bench today
By: farmboy Date: August 28, 2014, 10:49 am
---------------------------------------------------------
You are indeed a BRAVE man!!! I would just have to be out
whatever bucks it cost me @ the dealer. Sad part I pulled
wrenches for a living (70's). I'm precomputer control.
Shep
#Post#: 45440--------------------------------------------------
Re: Whats on your bench today
By: Chainsawrepair Date: August 28, 2014, 11:00 am
---------------------------------------------------------
I hate chasing them but cant afford it anymore so I try. I paid
$75 a hr once in mid late 90's and I said never again for right
now as long as I can, so I had to try. Heard the dealer was up
to $95 a hr now. :o :o :o :o
#Post#: 45589--------------------------------------------------
Re: Whats on your bench today
By: Al Smith Date: August 31, 2014, 4:26 am
---------------------------------------------------------
Partial success .One S25 running the other still carb problems
.The echo hedge clipper either has bad flywheel magnets or a
cooked coil .
I tried the remagnitizing thing and got one magnet to take ,the
other did not.I have another trimmer on the way as I type,flea
bay .Unless the guy lied about it ,it sounded like a funky carb
is all that's wrong with it .Might be okay might not .
#Post#: 45807--------------------------------------------------
Re: Whats on your bench today
By: Chainsawrepair Date: September 5, 2014, 12:59 pm
---------------------------------------------------------
Was grabbing some pics for a guy today. So post them here too.
[img]
(HTM) https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10671250_10204151072793576_1618093839044999699_n.jpg?oh=de8d68d779aa76f43fd8a2b9d7671400&oe=5484AAEA&__gda__=1419662015_05b8c87a9868ba736e69c26b19d9686d[/img]
[img]
(HTM) https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10516600_10204151068073458_3204358644355925138_n.jpg?oh=05f7cd805dc16c421044421e51fd3e6e&oe=548DDF32&__gda__=1418957415_f8c404faa1a3bcac8f4bf8a6086d7795[/img]
[img]
(HTM) https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/10687174_10204151072473568_4457869417239400783_n.jpg?oh=00f787df2d799f264b5d87eedf54c44b&oe=549BA04D&__gda__=1419452320_c1f9ace7e6286a1773370a13707dc70d[/img]
[img]
(HTM) https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10625017_10204151071433542_3307193877255498184_n.jpg?oh=79a845460ec88e1b8ab24ad324798041&oe=5493182B&__gda__=1418084222_db506d7ace2beebb92a57226af0777bb[/img]
[img]
(HTM) https://scontent-a-ord.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/1513795_10204151072513569_6052334514418110396_n.jpg?oh=14be64b5e4641f53dd9beb18d07587f2&oe=54841118[/img]
#Post#: 45830--------------------------------------------------
Re: Whats on your bench today
By: Al Smith Date: September 6, 2014, 11:13 am
---------------------------------------------------------
I had anticipated getting the danged Echo hedge clipper Thursday
.With Labor day in the mix maybe Fri .No go
So here is Fedex that wouldn't make a pimple on the butt of
either UPS or the postal service .Shipped from Fla,went to
Perrysburg Ohio then to Ft Wayne Indiana .I'll be lucky if it
doesn't go to Cleveland or San Diego before I get it .Bah humbug
. >:(
#Post#: 45831--------------------------------------------------
Re: Whats on your bench today
By: 660magnum Date: September 6, 2014, 11:30 am
---------------------------------------------------------
I've had those excursion deliveries with both UPS and USPS. Once
they go wild, it is hard to get them headed in the right
direction. Looking at the packages and the address label, there
is no explanation for the wild ride except perhaps they get
stuck against another package?
#Post#: 45836--------------------------------------------------
Re: Whats on your bench today
By: dutchsawdoctor Date: September 6, 2014, 3:04 pm
---------------------------------------------------------
[img width=600 height=450]
(HTM) http://up.picr.de/19435009lq.jpg[/img]
[img width=600 height=450]
(HTM) http://up.picr.de/19435010zc.jpg[/img]
[img width=600 height=450]
(HTM) http://up.picr.de/19435011to.jpg[/img]
[img width=600 height=450]
(HTM) http://up.picr.de/19435012wh.jpg[/img]
[img width=600 height=450]
(HTM) http://up.picr.de/19435013fn.jpg[/img]
[img width=600 height=450]
(HTM) http://up.picr.de/19435014rl.jpg[/img]
[img width=600 height=450]
(HTM) http://up.picr.de/19435015as.jpg[/img]
#Post#: 45837--------------------------------------------------
Re: Whats on your bench today
By: aclarke Date: September 6, 2014, 4:46 pm
---------------------------------------------------------
Saul, I like your style! I do a lot of light saw repair work on
the kitchen table or my office desk...
I was able to negotiate a deal with the boss to continue using
the kitchen table as long as I don't use kitchen knives as
screwdrivers or gasket scrapers.
#Post#: 45838--------------------------------------------------
Re: Whats on your bench today
By: dutchsawdoctor Date: September 6, 2014, 4:52 pm
---------------------------------------------------------
[quote author=aclarke link=topic=1732.msg45837#msg45837
date=1410039997]
Saul, I like your style! I do a lot of light saw repair work on
the kitchen table or my office desk...
I was able to negotiate a deal with the boss to continue using
the kitchen table as long as I don't use kitchen knives as
screwdrivers or gasket scrapers.
[/quote]
+1 ;D
#Post#: 45843--------------------------------------------------
Re: Whats on your bench today
By: Al Smith Date: September 6, 2014, 6:57 pm
---------------------------------------------------------
Ha I once rebuilt the three point lift hydraulic pump of a 1950
Ferguson tractor at the kithchen table .Two layers of plastic
and several of news paper .-----survival .I was poor as Jobs
turkey and it was cold out . ;D
*****************************************************
(DIR) Previous Page
(DIR) Next Page