(DIR) Return Create A Forum - Home --------------------------------------------------------- Chainsaw Repair (HTM) https://chainsawrepair.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Chainsaw Collection Pics - Signs - Whats on your be... ***************************************************** #Post#: 46018-------------------------------------------------- Re: Whats on your bench today By: Al Smith Date: September 9, 2014, 6:07 pm --------------------------------------------------------- Fedex finally delivered the Echo hedge clipper 4 days late .They might have had to enlist the help of the pony express for all I know. Rebuilt the carb first thing .The SOB wouldn't pump gas .Took the carb apart ,fiddled twiddled no go .It got dark so in the house I go--mad .So I thought about it work --impulse hole .Sure enough that was it .Fired it up and trimmed my hedge .All is good on the western front . ;D #Post#: 46020-------------------------------------------------- Re: Whats on your bench today By: 660magnum Date: September 9, 2014, 6:23 pm --------------------------------------------------------- +1 All is good that ends well. #Post#: 46021-------------------------------------------------- Re: Whats on your bench today By: 3000 FPS Date: September 9, 2014, 6:29 pm --------------------------------------------------------- I got a craftsman leaf blower for free from work. It had low compression down to 80 psi, so no way would it start. Took the cylinder off and found the ring stuck in the groove from carbon. I broke the ring loose and cleaned up the carbon, and of course I had to widen the ports a little and and muff mod it. Put it back together using the same ring and Yamabond to seal the crank case. Blower works great and cost was zero. You got to love it. #Post#: 46087-------------------------------------------------- Re: Whats on your bench today By: Al Smith Date: September 10, 2014, 6:05 pm --------------------------------------------------------- Cheap is good ,free is better . ;D #Post#: 46089-------------------------------------------------- Re: Whats on your bench today By: 3000 FPS Date: September 10, 2014, 6:21 pm --------------------------------------------------------- [quote author=Al Smith link=topic=1732.msg46087#msg46087 date=1410390319] Cheap is good ,free is better . ;D [/quote] Oh yea. That is one of the side benefits of where I work. I have about 3 weed wackers for free that just needed alittle expertise to get working again. The last item I got free was a Poulan 3400. The starter pulley is broke on it but that is about it. Piston and cylinder looked great. #Post#: 46130-------------------------------------------------- Re: Whats on your bench today By: Al Smith Date: September 11, 2014, 6:19 am --------------------------------------------------------- I get a lot of freebies myself .Generally it's a carb that needs rebuilt . Fact in the last 3 weeks,month I've gotten several weedwackers blowers etc up and running .One is a Ryobe 31 cc wacker .Talk about power for a week wacker . I get the stuff for nothng ,tinker with them .Maybe use them a short time and give them away to someone who needs but can't afford to buy them .No skin off my nose,I always get more . #Post#: 47085-------------------------------------------------- Re: Whats on your bench today By: dutchsawdoctor Date: September 25, 2014, 10:36 pm --------------------------------------------------------- Got a Solo 650 VA on mine bench, ignition work #Post#: 47516-------------------------------------------------- Re: Whats on your bench today By: pigpen60 Date: October 4, 2014, 7:43 pm --------------------------------------------------------- have a 2900 poulan on my bench. needs everything swapped over to a donor tank assembly(craftsman). has been on my bench for 2-3 months, cooler weather I can get on it. #Post#: 49413-------------------------------------------------- Re: Whats on your bench today By: jmester Date: November 18, 2014, 7:09 pm --------------------------------------------------------- Cleaning saws did my 2152 yesterday. 660 today. Have a 372xpw to split the case on locked up the big end rod bearing. Parts on order. It is a buddy of mines saw. He and his guys are rough on saws. I don't see them till they are smoked. Usually piston and cylinders and sometimes bearing/ crank issues. #Post#: 50309-------------------------------------------------- Re: Whats on your bench today By: Chainsawrepair Date: December 6, 2014, 7:07 pm --------------------------------------------------------- Received today. Is it bad that I just remembered I have a poulan 505 project saw still in the box it was shipped in unopened on the kitchen table. :D :D :D :D So technically not on the bench. :P ***************************************************** (DIR) Previous Page (DIR) Next Page