(DIR) Return Create A Forum - Home --------------------------------------------------------- Chainsaw Repair (HTM) https://chainsawrepair.createaforum.com --------------------------------------------------------- ***************************************************** (DIR) Return to: Chainsaw Collection Pics - Signs - Whats on your be... ***************************************************** #Post#: 65194-------------------------------------------------- Re: Whats on your bench today By: 3000 FPS Date: November 20, 2015, 11:56 am --------------------------------------------------------- [quote author=Cut4fun . link=topic=1732.msg65191#msg65191 date=1448040674] Had a little poulan (havent opened poulan case) dropped off today. Guy brought it in from a deer camp and said had a local professional dealer check it over and couldnt get it to start either. I like the challenge. ;D ;) Man I will laugh if this was something so simple to see. [/quote] It just makes you feel good fixing something for someone that others either could not figure out or did not want to take the time to figure out. #Post#: 65213-------------------------------------------------- Re: Whats on your bench today By: Chainsawrepair Date: November 20, 2015, 5:51 pm --------------------------------------------------------- [quote author=3000 FPS link=topic=1732.msg65194#msg65194 date=1448042176] [quote author=Cut4fun . link=topic=1732.msg65191#msg65191 date=1448040674] Had a little poulan (havent opened poulan case) dropped off today. Guy brought it in from a deer camp and said had a local professional dealer check it over and couldnt get it to start either. I like the challenge. ;D ;) Man I will laugh if this was something so simple to see. [/quote] It just makes you feel good fixing something for someone that others either could not figure out or did not want to take the time to figure out. [/quote] I peeked in the case before going out to eat. Looked like a brand new strato poulan 3314 in there #Post#: 65599-------------------------------------------------- Re: Whats on your bench today By: dutchsawdoctor Date: November 27, 2015, 11:42 pm --------------------------------------------------------- [quote author=dutchsawdoctor link=topic=1732.msg59367#msg59367 date=1436385162] the solo twin is back on the bench >:( one cilinder wont pic up, it only wont to pic up at higher rev. but it has spark all the way spark plug net 225 from Beru both cilinder puls 130 psi, gone split the crank case to see whats went wrong there, owner had it overhauld with new seals, but lots off screws i found where lose :o Saul [/quote] finaly i hve now time to work on this twin,( head to much work to do doing 60"s in a week ::) ) i have to pull the clutch of and then the starter recoil Saul #Post#: 65608-------------------------------------------------- Re: Whats on your bench today By: 3000 FPS Date: November 28, 2015, 11:53 am --------------------------------------------------------- [quote author=dutchsawdoctor link=topic=1732.msg65599#msg65599 date=1448689365] [quote author=dutchsawdoctor link=topic=1732.msg59367#msg59367 date=1436385162] the solo twin is back on the bench >:( one cilinder wont pic up, it only wont to pic up at higher rev. but it has spark all the way spark plug net 225 from Beru both cilinder puls 130 psi, gone split the crank case to see whats went wrong there, owner had it overhauld with new seals, but lots off screws i found where lose :o Saul [/quote] finaly i hve now time to work on this twin,( head to much work to do doing 60"s in a week ::) ) i have to pull the clutch of and then the starter recoil Saul [/quote] 60 hours a week does not leave much time for playing. The twin will be worth it when done. #Post#: 65638-------------------------------------------------- Re: Whats on your bench today By: dutchsawdoctor Date: November 29, 2015, 2:26 am --------------------------------------------------------- [quote author=3000 FPS link=topic=1732.msg65608#msg65608 date=1448733210] [quote author=dutchsawdoctor link=topic=1732.msg65599#msg65599 date=1448689365] [quote author=dutchsawdoctor link=topic=1732.msg59367#msg59367 date=1436385162] the solo twin is back on the bench >:( one cilinder wont pic up, it only wont to pic up at higher rev. but it has spark all the way spark plug net 225 from Beru both cilinder puls 130 psi, gone split the crank case to see whats went wrong there, owner had it overhauld with new seals, but lots off screws i found where lose :o Saul [/quote] finaly i hve now time to work on this twin,( head to much work to do doing 60"s in a week ::) ) i have to pull the clutch of and then the starter recoil Saul [/quote] 60 hours a week does not leave much time for playing. The twin will be worth it when done. [/quote] Right about that ;D, ordered for my self a new puller-set to get that clutch of ;) Saul #Post#: 65685-------------------------------------------------- Re: Whats on your bench today By: jmester Date: November 29, 2015, 8:04 pm --------------------------------------------------------- Have a Husqvarna 580 BTS back back blower. Needs pto side bearing and a pto case half as the mounting ears are cracked. #Post#: 66505-------------------------------------------------- Re: Whats on your bench today By: weimedog Date: December 17, 2015, 7:32 am --------------------------------------------------------- A smashed MS391, a Dirty MS290, a tuned too rich MS460, A Husqvarna 51 with a rotted fuel line, A toasted 562 and a 372X-torq with a wasted clutch side main bearing. Another 562 getting that latest release of ignition/carb and wiring. A Dolmar 120 with what looks like a tank vent rotted. A bearings up rebuild on a 385, Then my fun Projects hopefully. "Cyclops II" & a tweaked MS660. #Post#: 66507-------------------------------------------------- Re: Whats on your bench today By: 3000 FPS Date: December 17, 2015, 9:01 am --------------------------------------------------------- [quote author=weimedog link=topic=1732.msg66505#msg66505 date=1450359162] A smashed MS391, a Dirty MS290, a tuned too rich MS460, A Husqvarna 51 with a rotted fuel line, A toasted 562 and a 372X-torq with a wasted clutch side main bearing. Another 562 getting that latest release of ignition/carb and wiring. A Dolmar 120 with what looks like a tank vent rotted. A bearings up rebuild on a 385, Then my fun Projects hopefully. "Cyclops II" & a tweaked MS660. [/quote] You don't have enough to do. #Post#: 66546-------------------------------------------------- Re: Whats on your bench today By: farmboy Date: December 17, 2015, 9:55 pm --------------------------------------------------------- 2-346 OE doing AFM 44.3 PC on both. 1 needs clutch side seal which I don't have in stock, dont know about seals on the other. Checked case screws on both they started tightening @ 3 nm. I've started checking them on everything now. 2002 2159 Jred I just picked up started @ 4 nm. Shep #Post#: 66547-------------------------------------------------- Re: Whats on your bench today By: jmester Date: December 17, 2015, 10:38 pm --------------------------------------------------------- The couple 346 I have worked on the lean running condition came from loose cylinder base screws. ***************************************************** (DIR) Previous Page (DIR) Next Page