(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Chainsaw Collection Pics - Signs - Whats on your be...
*****************************************************
#Post#: 67476--------------------------------------------------
Re: Whats on your bench today
By: wild262 Date: December 31, 2015, 5:30 am
---------------------------------------------------------
[quote author=farmboy link=topic=1732.msg66546#msg66546
date=1450410925]
2-346 OE doing AFM 44.3 PC on both. 1 needs clutch side seal
which I don't have in stock, dont know about seals on the other.
Checked case screws on both they started tightening @ 3 nm.
I've started checking them on everything now. 2002 2159 Jred I
just picked up started @ 4 nm.
Shep
[/quote]I've had the same issue with those screws loosing up as
well with that line of saws. More so the plastic cased saws. On
new rebuilds I have been dabbing lock tight on the threads. On
the course threaded bolts of the 340-350 series and Jonny CS
plastic cased series, I dab the lower half of the screw with
lock tight and the upper half below the head with 1194 or dirko.
After checking the last 2 rebuilds, they seem to be staying
tight. Time will tell. Just be sure to clean up & degrease the
threads of the screws and the slots (holes) before applying.
try this, it really helps.
As far as whats on my bench, a 268xp with carb. issues, a 345
Husky with loose intake collar, a Dolly 7900 waiting for a HD
air cleaner kit, and a Husky 66 waiting for a restoration job.
LOL Not enough to do :D Soon as this ice melts, got to get
some green honey locust cut to mix with dry. Can't wait. :(
#Post#: 67478--------------------------------------------------
Re: Whats on your bench today
By: Chainsawrepair Date: December 31, 2015, 10:35 am
---------------------------------------------------------
[quote author=wild262 link=topic=1732.msg67476#msg67476
date=1451561442]
As far as whats on my bench, a 268xp with carb. issues,
[/quote]
Whats it doing? I have a 268xp with 272 top I been chasing and
now tore down on the bench. Husky board 268 272 thread.
#Post#: 67479--------------------------------------------------
Re: Whats on your bench today
By: Gatekeeper Date: December 31, 2015, 12:49 pm
---------------------------------------------------------
Getting ready to go grind on a 7900 cylinder. I did the 7910
last night.
#Post#: 67495--------------------------------------------------
Re: Whats on your bench today
By: wild262 Date: December 31, 2015, 5:11 pm
---------------------------------------------------------
[quote author=Cut4fun . link=topic=1732.msg67478#msg67478
date=1451579706]
[quote author=wild262 link=topic=1732.msg67476#msg67476
date=1451561442]
As far as whats on my bench, a 268xp with carb. issues,
[/quote]
Whats it doing? I have a 268xp with 272 top I been chasing and
now tore down on the bench. Husky board 268 272 thread.
[/quote]Nothing major, I just put the wrong carb. on it by
mistake. Too many carbs on bench. Went to adjust carb. and
there was no idle screw. put a 61 carb. on. Get this fixed
tomarrow and get it listed. Just got an Echo 330T done. Like
running a whole new saw. Unreal what a M. mod & intake mod. can
do to these little saws.
#Post#: 67694--------------------------------------------------
Re: Whats on your bench today
By: dutchsawdoctor Date: January 4, 2016, 2:21 pm
---------------------------------------------------------
;D ;D
(HTM) http://up.picr.de/24188126cx.jpg
(HTM) http://up.picr.de/24188127vs.jpg
(HTM) http://up.picr.de/24188128rq.jpg
(HTM) http://up.picr.de/24188129vs.jpg
(HTM) http://up.picr.de/24188134vp.jpg
(HTM) http://up.picr.de/24188135qf.jpg
(HTM) http://up.picr.de/24188136ti.jpg
(HTM) http://up.picr.de/24188137my.jpg
(HTM) http://up.picr.de/24188138zq.jpg
(HTM) http://up.picr.de/24188146xa.jpg
(HTM) http://up.picr.de/24188147gr.jpg
(HTM) http://up.picr.de/24188148yx.jpg
(HTM) http://up.picr.de/24188149fd.jpg
(HTM) http://up.picr.de/24188150ty.jpg
(HTM) http://up.picr.de/24188151xp.jpg
(HTM) http://up.picr.de/24188152ve.jpg
(HTM) http://up.picr.de/24188153ml.jpg
(HTM) http://up.picr.de/24188154pp.jpg
(HTM) http://up.picr.de/24188155hw.jpg
(HTM) http://up.picr.de/24188160vu.jpg
(HTM) http://up.picr.de/24188161lt.jpg
#Post#: 67695--------------------------------------------------
Re: Whats on your bench today
By: dutchsawdoctor Date: January 4, 2016, 2:26 pm
---------------------------------------------------------
(HTM) http://up.picr.de/24188196lp.jpg
(HTM) http://up.picr.de/24188197vl.jpg
(HTM) http://up.picr.de/24188198ok.jpg
(HTM) http://up.picr.de/24188199mp.jpg
(HTM) http://up.picr.de/24188200kv.jpg
(HTM) http://up.picr.de/24188203xl.jpg
(HTM) http://up.picr.de/24188204mc.jpg
(HTM) http://up.picr.de/24188205mn.jpg
(HTM) http://up.picr.de/24188206vk.jpg
(HTM) http://up.picr.de/24188207yh.jpg
(HTM) http://up.picr.de/24188209nu.jpg
(HTM) http://up.picr.de/24188210uu.jpg
(HTM) http://up.picr.de/24188211fd.jpg
(HTM) http://up.picr.de/24188212pl.jpg
(HTM) http://up.picr.de/24188213wr.jpg
(HTM) http://up.picr.de/24188216gz.jpg
(HTM) http://up.picr.de/24188217fx.jpg
(HTM) http://up.picr.de/24188219yz.jpg
(HTM) http://up.picr.de/24188220ez.jpg
(HTM) http://up.picr.de/24188221vb.jpg
(HTM) http://up.picr.de/24188224ye.jpg
(HTM) http://up.picr.de/24188225ta.jpg
#Post#: 67696--------------------------------------------------
Re: Whats on your bench today
By: dutchsawdoctor Date: January 4, 2016, 2:31 pm
---------------------------------------------------------
And a first start ;D ;D ;D ;D
(HTM) https://youtu.be/ucqf7ZxBstc
#Post#: 67699--------------------------------------------------
Re: Whats on your bench today
By: Gatekeeper Date: January 4, 2016, 3:26 pm
---------------------------------------------------------
I assembled the 2165 case today. A little later I'll tear the
365/2165 mix down and put the tank on and be ready to run it.
#Post#: 67701--------------------------------------------------
Re: Whats on your bench today
By: 3000 FPS Date: January 4, 2016, 5:13 pm
---------------------------------------------------------
Nice Saul.
#Post#: 67716--------------------------------------------------
Re: Whats on your bench today
By: aclarke Date: January 4, 2016, 8:37 pm
---------------------------------------------------------
Neat project Saul, and a cool wife that keeps you company while
you're wrenching on the kitchen table, I'm jealous!
*****************************************************
(DIR) Previous Page
(DIR) Next Page