(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Stihl
*****************************************************
#Post#: 53151--------------------------------------------------
Re: 084 Ignition trouble
By: Chainsawrepair Date: January 23, 2015, 5:22 pm
---------------------------------------------------------
jj = unlimited ignitions use slot B since the flywheel makes 3/4
of a full rotation before the coil fires after the magnets pass
over the lamination.
#Post#: 53181--------------------------------------------------
Re: Woods ported 084
By: 6.8x43 Date: January 23, 2015, 9:58 pm
---------------------------------------------------------
I'm pretty sure I bought that DN piped 084 from Jack M, can't
remember who I sold it to though. I didn't have a good chain at
the time for it but she was a beast none the less.
#Post#: 53185--------------------------------------------------
Re: Woods ported 084
By: Gatekeeper Date: January 23, 2015, 10:50 pm
---------------------------------------------------------
[quote author=6.8x43 link=topic=66.msg53181#msg53181
date=1422071881]
I'm pretty sure I bought that DN piped 084 from Jack M, can't
remember who I sold it to though. I didn't have a good chain at
the time for it but she was a beast none the less.
[/quote]
I think Zach and Joe had it at one time. Not sure they still do.
#Post#: 53191--------------------------------------------------
Re: Woods ported 084
By: 6.8x43 Date: January 24, 2015, 7:28 am
---------------------------------------------------------
I know Joe bought a DN 660 from me and still has it, I bought
that 660 from Jack also, lol. Those old GTGs were like a swap
meet.
I found a decent 440 that is almost ready to head your way, just
need to run a few more tanks through her. ;D
#Post#: 53192--------------------------------------------------
Re: Woods ported 084
By: Gatekeeper Date: January 24, 2015, 8:08 am
---------------------------------------------------------
I liked running that 084. It was fun and you didn't have to
worry about overheating it.
Sounds good.
#Post#: 53195--------------------------------------------------
Re: 084 Ignition trouble
By: aclarke Date: January 24, 2015, 9:14 am
---------------------------------------------------------
Thk kevin!
#Post#: 53201--------------------------------------------------
Re: Woods ported 084
By: Chainsawrepair Date: January 24, 2015, 10:18 am
---------------------------------------------------------
[quote author=6.8x43 link=topic=66.msg53181#msg53181
date=1422071881]
I'm pretty sure I bought that DN piped 084 from Jack M, can't
remember who I sold it to though. I didn't have a good chain at
the time for it but she was a beast none the less.
[/quote]
Did you go by SS......... on AS?
#Post#: 53207--------------------------------------------------
Re: Woods ported 084
By: 6.8x43 Date: January 24, 2015, 12:37 pm
---------------------------------------------------------
Yup, 2K, the original. ;D
#Post#: 53216--------------------------------------------------
Re: Woods ported 084
By: Gatekeeper Date: January 24, 2015, 6:12 pm
---------------------------------------------------------
I was wondering if that was you with the 6.8 name.
#Post#: 54020--------------------------------------------------
084 Oil pump
By: jmester Date: February 9, 2015, 9:18 pm
---------------------------------------------------------
Does anyone know if the piston pump set from on 088/880 will
work for the 084 oil pump. the 084 part number is 1124 007 1014
the part number for the 880 kit is 1124 007 1013. Based of the
IPL they share alot of the same parts on that end of the pump.
washers/o rings/seals/springs.
*****************************************************
(DIR) Previous Page
(DIR) Next Page