(DIR) Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
(HTM) https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
(DIR) Return to: Stihl
*****************************************************
#Post#: 54555--------------------------------------------------
Re: 084 Crank seal tool
By: aclarke Date: February 19, 2015, 10:17 pm
---------------------------------------------------------
Really good saws, but they take a toll on your body if using
them for long periods!
#Post#: 54556--------------------------------------------------
Re: 084 Crank seal tool
By: man of stihl Date: February 20, 2015, 4:17 am
---------------------------------------------------------
[quote author=jmester link=topic=4672.msg54522#msg54522
date=1424348853]
Thanks Cut. Think I will send him a pm and see if we can get the
ball rolling. Guess it does not matter as the seals are in but
it would be nice the have the part numbers stored some where.
[/quote]PM sent
Stihl frowns on part numbers out in the open.
#Post#: 54557--------------------------------------------------
Re: 084 Crank seal tool
By: Chainsawrepair Date: February 20, 2015, 5:40 am
---------------------------------------------------------
[quote author=man of stihl link=topic=4672.msg54556#msg54556
date=1424427466]
[quote author=jmester link=topic=4672.msg54522#msg54522
date=1424348853]
Thanks Cut. Think I will send him a pm and see if we can get the
ball rolling. Guess it does not matter as the seals are in but
it would be nice the have the part numbers stored some where.
[/quote]PM sent
Stihl frowns on part numbers out in the open.
[/quote]
PM me too. I can do part numbers. I block stihl and SM boards
from guest. ;)
#Post#: 54558--------------------------------------------------
Re: 084 Crank seal tool
By: jmester Date: February 20, 2015, 5:46 am
---------------------------------------------------------
Pm sent.
#Post#: 54560--------------------------------------------------
Re: 084 Crank seal tool
By: jmester Date: February 20, 2015, 6:53 am
---------------------------------------------------------
The 1127 893 2400 seal driver for the 088 is the right driver
for the 084. Don't know if the one I have was not made correctly
drilled the hole threw the center to 1/2" and it fits like a
glove.
#Post#: 54569--------------------------------------------------
Re: 084 Crank seal tool
By: Cut4fun Date: February 20, 2015, 3:26 pm
---------------------------------------------------------
Here I will put them here. Thanks MOS and JM
Stihl 084 part numbers for ignition side oil seal press sleeve
is 1124 893 2400, clutch side is 1119 893 2401.
#Post#: 54597--------------------------------------------------
Stihl 084 slotted nuts for HD cover base
By: Chainsawrepair Date: February 21, 2015, 9:29 am
---------------------------------------------------------
Just posting pic here so folks know what they are.
stihl 084 HD air filter base special nuts made of aluminum
1124 141 8305 11241418305
Only found 2.
They are yours if your still wanting
[member=356]jmester[/member]
#Post#: 54619--------------------------------------------------
Re: Stihl 084 slotted nuts for HD cover base
By: jmester Date: February 21, 2015, 3:06 pm
---------------------------------------------------------
Indeed I do still want them. I am on my way to the Pay Pal
machine.
#Post#: 54628--------------------------------------------------
Re: Stihl 084 slotted nuts for HD cover base
By: farmboy Date: February 21, 2015, 8:44 pm
---------------------------------------------------------
There is another NOS cyl cover on Ebay didn't get the link.
Shep
#Post#: 54636--------------------------------------------------
Re: Stihl 084 slotted nuts for HD cover base
By: Chainsawrepair Date: February 22, 2015, 10:34 am
---------------------------------------------------------
[quote author=jmester link=topic=4689.msg54619#msg54619
date=1424552761]
Indeed I do still want them. I am on my way to the Pay Pal
machine.
[/quote]
Thank you for the extra sent to use for site.
Going to try and ship Mon_Tue
*****************************************************
(DIR) Previous Page
(DIR) Next Page